SELLEYS No More Gaps White Multi Purpose 320G Tube/ 380g Cartridge
No More Gaps is a durable, flexible acrylic gap sealant for interior and exterior applications where joint movement causes rigid fillers to crack or fall out.
Features
- Superior flexibility to cope with building movement, meaning the cracks and gaps will be hidden for longer.
- Has greater than 300% elongation/stretch and up to +/- 15% movement capability.
- Superior adhesion to a broad range of surfaces, resulting in a lasting finish.
- A smooth flawless finish and minimal shrinkage.
- Can be painted over with both water and oil based paints, after the surface has skinned (approximately 30 minutes* after application).
- Is formulated for long term resistance to cracking and crumbling.
- Easy water clean-up
- Will not stain building materials.
- Has good resistance to weathering.
- Low toxic, low odour, low VOC, less harmful to the environment
Ideal For
- Ceramic, concrete and wood
Size 320g Tube, 380g Cartridge
Colour White
Full Cure Time Skins in 20 minutes, Paintable after 1 hour. Ideally left to dry for at least 8 hours.
Technology Water Based
Use Exterior, Interior
Where can this product be used?
No More Gaps may be used for sealing gaps and joints where slight movement is anticipated (less than +/- 10% of joint width)
- Between window or door frames and the wall
- Along skirting boards and around cornices
- Between bench tops and tiles
- In corners or between the wall and ceiling or anywhere shrinkage or movement has caused rigid filler to crack
What materials is this product suitable for?
- Brick
- Concrete
- Timber
- Fibre cement sheeting
- Hardboards
- Laminated plastics
- Ceramics
- Aluminium
- Painted surface
Video Demo
- Ensure surfaces are clean.
- Apply a layer of masking tape along the perimeter line where Selleys No More Gaps are to be applied.
- Cut cartridge tip with a knife or blade and insert into caulking gun.
- Attach nozzle on cartridge and cut the nozzle tip at 45 degree angle.
- Apply on needed surface and, smoothen with a scraper or spatula.
- Once applied, peel of the masking taped along the perimeters for a clean finishing & leave the sealant to dry for at least 6-8 hours.
Limitations:
- Maximum gap size recommended – width 25mm, depth 12mm.
- No More Gaps is not recommended where significant joint movement occurs, such as gaps between tongue and groove boards or weatherboard overlaps.
- Not suitable for sealing around bathtubs, kitchen sinks and in shower recesses.
- Not suitable for areas of continuous water immersion or in constantly damp areas.
- No More Gaps should not be applied at temperatures below 5oC.
- No More Gaps is not suitable in those applications where joint movement is in excess of +/- 10% of joint width.
